The legal definition and meaning of defective manufacture refers to a hazardous or dangerous product caused by something going wrong in the manufacturing process. When manufacturers make errors, products can hit the market with flaws and defects, some of which have the potential to cause injury to the end user. For instance, a bicycle with loose parts might come apart while ridden. If this happens at a high rate of speed or on a steep incline or decline, serious injuries to the rider may result.
Causes of Manufacturing Defects
Most manufacturing defects occur for one of two reasons. One, the materials used are of poor quality. Two, the workmanship is substandard.
Poor Quality Materials
To save on their bottom line, some manufacturers have been known to skimp on material quality. Believing it can save them money without affecting the finished product, they purchase cheaper components from questionable suppliers.
Unfortunately, poor quality materials do affect the finished product, sometimes in critical ways. A manufacturer is liable when it puts a product made of low-quality materials on the market and the product injures a user.
Manufacturing defects also happen when the workers putting a product together do not excel at their craft. Several causes might contribute to substandard workmanship: laziness, lack of training, lack of experience, or poor supervision of workers.
The Difference Between Defective Manufacture and Defective Design
Most defective products happen either due to manufacturing or design errors. Either way, the manufacturer is liable for injuries that result from the product defect.
But how can you tell whether the error that led to a defective product occurred at the design stage or at the manufacturing stage? One way is to answer this question: Would the defect still be present if the product was properly built?
If the answer is yes, then the flaw most likely resulted from a design defect. Design defects are inherent. They enter the equation before the manufacturing process even begins. The manufacturing team can assemble the products exactly to standard, and the product will still be defective, as the standard itself is the problem.
If the answer is no, then the problem is almost certainly a manufacturing defect. A manufacturing defect by definition occurs when a mistake during production causes the finished product to differ from the design. In other words, if correctly building a product eliminates the flaw, then clearly the problem is not with the design of the product, but with the manufacturing process.
Were You Hurt By an Improperly Manufactured Product? The Lawyers at Newsome Melton Can Help You
At Newsome Melton, our lawyers focus on product liability. We can help you win damages if you were injured by a defective product. Come in for a free case evaluation to discuss how the meaning and legal definition of defective manufacturing applies to your case and what you may be compensated for. To schedule your appointment today, call our office at 888-808-5977.
Recent Frequently Asked Questions:
- What Allegations Have Been Filed Against The Takata Corporation And The Automobile Manufacturers?
- What You Need To Know About Defective Tires
- What Are The Causes Of Action In A Florida Product Liability Case?
- What Year Hondas Are Affected By The Takata Airbag Recall?
- How Does The Reward System Work For Whistleblowers Under The False Claims Act?